FiveStar - MD3 Adhesion Promoter

The perfect surface prep for plastic

• Specifically engineered adhesion promoter assures proper paint bonding to our special plastic
• Other automotive grade primers on the market may not work at all or cause severe paint flaking
• Improves adhesion of vinyl by enhancing the bond between adhesive on the vinyl and the substrate, for a more durable, long-lasting application
• Comes in an aerosol spray can for quick and easy application
• A single can coats approximately 5 individual parts

3 STEP PROCESS FOR THE BEST VINYL ADHESION:

1.) CLEAN THE SURFACE

• We recommend that our plastic panels be cleaned with a general cleaner/degreaser, finish cleaning with Isopropyl Alcohol and a lint-free cloth. 

2.) APPLY ADHESION PROMOTER

• Apply the MD3 Adhsion Promotor by spraying where your wrap will be applied. Make sure to coat the outside edges well.

3.) INSTALL YOUR WRAP

• The vinyl needs to cure for at least 24 hours for proper adhesion.
  Tip: Using a heat gun over the entire wrap especially around the edges helps to bond the adhesive to the plastic.